29 maart 2023
Hittech at Pittcon 2023 in Philadelphia
Last week Philip Bakker and Niels Dogterom stopped in at the Pittcon Tradeshow on Laboratory Science, in Philadelphia!......
Nieuws
28 maart 2023
Successful participation Hittech in ZIE
Hittech Group participated in a very successful ZIE event, organized by HI Delta......
09 februari 2023
Hittech Bihca starts project in cooperation with German University of Applied Sciences
Hittech Bihca starts project in cooperation with German University of Applied Sciences......
28 november 2022
Application of Materials in the High Tech Industry
Last week the course Application of Materials in High Tech Industry started for the second time......
13 november 2022
Visit Hittech at the Precision Fair – Booth 333
Hittech is attending the Precision Fair again......
26 oktober 2022
Hittech and Norsk Titanium make leap in Sustainable Titanium manufacturing
Hittech and Norsk Titanium will start production of carrier structures for ASML using 3D techniques......
05 september 2022
Thread Verification Robot ensures watertight verification and traceability
Hittech Multin developed an advanced test robot for checking screw holes......
07 juni 2022
Hittech at 2022 EUSPEN conference in Geneva
From the 31th of May to the 3rd of June EUSPEN, the European Society for Precision Engineering and Nanotechnology held their annual...
31 mei 2022
Excursion MSc. Students TU Delft at Hittech Multin
Last week Hittech Multin organized an excursion in collaboration with Dispuut Taylor of the TU Delft......
30 mei 2022
Hittech Multin Building 2 completed
This week the new building of Hittech Multin has been formally handed over by the contractor......
18 mei 2022
Fuji Seal celebrates 125th anniversary
Hittech Comac wants to congratulate Fuji warmly on its 125th anniversary......
05 april 2022
Exterior of Hittech Multin building extension is approaching completion
Structural work of the new Hittech Multin building extension is approaching its completion......
29 maart 2022
Collaboration Hittech Comac and Qlayers
Due to Qlayers company's rapid growth and increasing global demand for their coating robots, they signed a contract with @Hittech Comac...
17 maart 2022
Hittech Wafer level sensor featured in Mikroniek
It is an honor that our high accuracy level sensor for wafers is featured of this month's DSPE Mikroniek magazine......
14 februari 2022
New master’s program ‘Applications of materials in high-tech engineering’
On February 8, the new master's program at the 3ME faculty of the TUDelft “Applications of materials in high-tech engineering” started......
25 januari 2022
Visit of the Dutch Embassy to Hittech Wemac
Hittech Wemac Sdn Bhd was honoured by a visit of the Embassy of the Kingdom of the Netherlands......
04 januari 2022
Hittech Group expands by acquiring Landes High-End Machining
Hittech Group expands by acquiring Landes High-End Machining......
06 december 2021
Looking back at successful Precision Fair & SEMICON Europe
In November we had the possibility for the first time in 2 years to participate in two major trade shows:......
09 november 2021
Hittech shows 50nm Levelsensor at Precision Fair & SEMICON Europe
As a part of its Technology Roadmap Program Hittech has developed a high accuracy level sensor for wafers......
25 oktober 2021
Hittech Colloquium on 3D Metal Printing
On September 30, the third Hittech Colloquium took place at the LOFT of Ramlab......
15 oktober 2021
Additional new CNC milling machines for Hittech Wemac
Hittech Wemac has received 2 brand new CNC milling machines Hartford MVP-8......
13 oktober 2021
Come and visit us at the Precision Fair 2021
Fortunately, the developments surrounding Corona are such that the first Trade Fairs are actually being organized again......
20 juli 2021
Hittech and TUDelft are developing a new generation of eye scanners for Easyscan
Easyscan Technology has been a valued customer of the Hittech Group for a long time. A joint technology development was recently...
12 juli 2021
Tunable resonant mirror
Hittech Group has an internal “Technology Project” in which we focus on technology development for Product Development, Production and...
28 juni 2021
Norsk Titanium Expands into the Industrial Application Market in collaboration with Hittech Group
Norsk Titanium AS announced an expansion of its customer base into the industrial application market sector in collaboration with...
21 juni 2021
Visit Deputy Mayor Saskia Bruines to Hittech
On the 11th of June, 2021 Saskia Bruines visited Hittech Multin on the Technology Park Ypenburg in The Hague......
16 juni 2021
Wire Arc Additive Manufacturing (WAAM) at the Smart Industry event
Hittech was invited, together with Ramlab (field lab equipped with 3D metal printers), to give a presentation about WAAM (Wire Arc...
22 april 2021
Release Hittech Wemac company video
Hittech Wemac, the Malaysian production site of Hittech Group, has released its latest company video......
09 april 2021
First asparagus robot in the Netherlands
Our customer Cerescon has delivered the first asparagus robot in the Netherlands......
23 maart 2021
Additional clean room in operation at Hittech Multin
In addition to its current 650m2 cleanroom, Hittech Multin has invested in an extendable cleanroom to create extra space for the...
08 maart 2021
Ramlab and Hittech successfully delivered their first manufactured titanium part
Hittech has successfully delivered its first manufactured titanium (Ti6Al4V) part together with Ramlab for the AMable initiative,.....
18 februari 2021
New RGA facility in operation at Hittech Multin
Hittech Multin has formally released its new in-house Residual Gas Analysis (RGA) facility......
30 december 2020
Hittech Group | Het gespleten jaar van Hittech (artikel Mechatronica & Machinebouw)
2020 is een jaar met twee gezichten voor Hittech Group......
15 december 2020
Extension of Hittech Multin
We are proud to announce that the supervisory board of Hittech has released the extension plans of Hittech Multin at the Ypenburg...
13 juli 2020
Schroefdraadrobot bij Hittech Bihca
Bij Hittech Bihca produceren we al geruime tijd carriers voor de semicon industrie......
03 juli 2020
Materiaalkennis noodzaak voor ontwerpers
Invar en Duplex waren dit jaar onderwerp van het halfjaarlijkse colloquium over materialen van Hittech University......
26 juni 2020
Hittech Bihca investments
Hittech invests in renewal and expansion at its companies......
19 juni 2020
Hittech wants employees to drive their own success
With our slogan being "masters in improvement", we at Hittech want to make sure that our employees keep learning about new technology,......
07 mei 2020
Interreg 2 Seas 3D & FPP project
Hittech Multin heeft samen met een zevental organisaties en universiteiten deelgenomen aan het Interreg 2 Seas 3D & FPP project......
09 maart 2020
Hittech Multin delivers single-wafer RTP thermal processing machines
Hittech Multin has recently finalized the delivery of an important order of single-wafer RTP thermal processing machines......
09 maart 2020
Employee assistance within Hittech
At Hittech there is a cooperation within the machining companies......
21 februari 2020
Hittech University ‘Materials’ 30 January 2020
30 January 2020 the second edition of the Hittech University colloquia, this time about ‘Materials’, took place......
10 december 2019
Calculating the advantages of additive manufacturing
The post-processing of high-precision, 3D-printed metal parts is still too costly......
09 december 2019
Hittech Comac gaat verhuizen!
Vanaf 6 januari 2020 is het nieuwe adres van Hittech Comac......
05 december 2019
EasyScan en Hittech Multin: samen sterk
EasyScan is dé state of the art netvliesscanner die in steeds meer optiekwinkels en oogzorgpraktijken een belangrijke plek inneemt......
14 november 2019
Nieuwe DMU 100 Duoblock machine voor Hittech Bihca
Hittech Bihca heeft geïnvesteerd in een DMU 100 Duoblock machine......
14 november 2019
Nieuw Hittech logo gepresenteerd op de Precisiebeurs
Op de Precisiebeurs in Veldhoven hebben we deze week ons nieuwe logo gepresenteerd......
07 november 2019
Proud to introduce new Hittech logo on Precision Fair 13-14 November
Hittech has shown an impressive development in recent years......
01 oktober 2019
Hittech Gieterij Nunspeet celebrates its 70th year anniversary
This year Hittech Gieterij Nunspeet has been producing aluminium sand castings for 70 years......
01 oktober 2019
3D & FPP project demonstreert oplossing om post processing AM-werkstukken te versnellen
De partners in het 3D & FPP project zijn erin geslaagd om een softwaretool te ontwikkelen om 3D geprinte werkstukken gemakkelijker na...
20 augustus 2019
New building Hittech Comac
Renovation of the new premises of Hittech Comac is in full progress ......
27 juni 2019
New EDM machine for Hittech Prontor
We were very happy to have been approved for the purchase of a new EDM machine.......
18 juni 2019
Hittech University – “It is all about understanding materials”
On June 13, the first technical Colloquium of Hittech University took place. Five lectures presented different (technical and...
17 april 2019
New Prismo measuring machine installed at Hittech MPP
In collaboration with Carl Zeiss Industrielle Messtechnik GmbH a Prismo measuring machine is installed at Hittech MPP....
11 april 2019
Hittech Training ISO 9001 – Internal Auditor
Within the Hittech Group several coordination groups (Technology, Quality, Purchase, HR) work closely together on specific topics......
26 maart 2019
New 5 axis simultaneous milling machine installed at Hittech MPP
Because of a higher demand of larger products with a higher accuracy and a more complex geometry, Hittech MPP has......
19 maart 2019
Interview NIMO – The development of Project Management at Hittech
Marco Verloop, Director Projects at Hittech Group, has recently been interviewed by the NIMO Project Management Institute......
15 maart 2019
Hittech Multin QMS updated to latest version ISO13485 standard
As of the 1st of March Hittech Multin has received its updated ISO485:2016 certificate. Last year all procedures of the QMS......
13 maart 2019
2 casting robots successfully installed at HGN
Hittech Gieterij Nunspeet has invested in robotizing the casting process by placing two casting robots....
05 maart 2019
Hittech boat wins Bronze on World Cup Flying Dutchman
Ard Geelkerken from Hittech Multin and his sailing mate Enno Kramer finished in third place on the World Championship......
06 februari 2019
New AgieCharmilles Cut 2000 S installed at Hittech Bihca
Hittech Bihca has invested in a new AgieCharmilles spark eroding machine...
28 januari 2019
A ‘grade 2’ area in the cleanroom of Hittech Multin
Hittech Multin invested in a ‘grade 2’ area in the cleanroom...
23 januari 2019
Joop Sassen and Jan Dalhuisen appointed in the Supervisory Board of Hittech Group
New members Supervisory Board of Hittech Group...
22 januari 2019
Hittech Gieterij Nunspeet saved 28.051 kg CO2 in 2018
Replacing of the lighting led to a saving of 28.051 kg...
28 juni 2018
Management change Hittech
On Thursday 28 June, the management change of Hittech Group took place during a special event organized for this purpose in The Hague....
26 juni 2018
1000th Easyscan
At the end of June, Hittech Multin produced the 1000th Easyscan retina scanner for its client Easyscan BV. The cooperation between...
04 juni 2018
LEA from Robot Care Systems in production
After intensive collaboration and completion of a joint New Product Introduction project, Hittech Multin started production of the LEA...
